Professional use ♡
Our products are designed for stylists and salons. Using nail products without proper training carries risks and can lead to disappointment, as they may not produce the desired results.

Preparing the natural nail
Make sure the nail plate is clean, dry and free of grease.
Good preparation is essential for a strong bond.

• Spray the Cleaner on your hands and nails to disinfect them.
• Gently push back the cuticles with a Cuticle Pusher.
• Then remove the shine layer from the nail with the Buffer File Deluxe and file the nails into the desired shape with the Straight Wooden File.
• Now an e-manicure can be performed if you have the right knowledge.
• Degrease and clean the nail with Prep & Prime.
• Now apply the Bonding Primer. This is necessary for adhesion.
• Apply Basecoat 2 to the nail and cure it for 60 seconds under our LED lamp.
  

Applying the NN Gel

• First apply a thin layer of NN Gel and cure it for 120 seconds under our LED lamp.
• Now apply a buildable layer of NN Gel starting from the cuticle, not too thick.
• Use the Fine Liner Brush to evenly distribute the NN Gel to the free edge.
• Turn the hand 180 degrees, upside down, so that a natural curve is created in the NN Gel.
• Turn the hand back and once the NN Gel is shaped as it should be, you can cure it for 120 seconds under our LED lamp.

Always remove the adhesive layer in the following situations:

• If you want to apply an extra layer over the NN Gel, for example for extra coverage;
• After laminating;
• Before applying Gel Polish;
• Before applying the Topcoat.
• Now apply a topcoat and cure it for 60 seconds under our LED lamp.
• Using the Straight Wooden File, file the shape until smooth to remove any brittle edges and skin.
• Nourish your cuticles with our Cuticle Oil.

All products are for nail application only.

Avoid contact with skin.

Our products are sensitive to UV/LED light.

Keep out of reach of children.